Comparison of old and new CROP
Comparison of "old" Crop (menu Production cycles, Tasks) and "new" Crop (Work order)
Introduction
1. Comparison of Production cycles and Work orders
Converting process rules:
a) Data recorded within PRODUCTION CYCLES are converted into WORK ORDERS data.
Individual Work order represents 1 crop area which was recorded within 1 Production cycle as Crop area.
Crop areas on Production Cycles where there was no Farming tasks recorded are not converted into Work orders.
b) Number of created work orders is equal to the number of previously assigned crop areas on Production cycles for which there were realization reported. If crop area was added to Production cycle, but no work was reported on it through Farming task, no work order is going to be created.
Picture 3: Product WINTER BARLEY within production cycle WINTER BA 2015 with assigned crop area Subdivision 541779_1 (above, old CROP) is converted into Work order 14-60C-000004 of product WINTER BARLEY on Crop area Subdivision 541779_1 (below, new CROP)
------------------------------------
Picture 4: Two Crop areas, assigned to product WHEAT within Production cycle WHEAT 2013 (above, old CROP) converted into two Work orders for Wheat (13-60C-000002 and 13-60C-000001), with related Crop Areas 1706802_5 and 541779_5 with 23,75 and 1 ha (below, new CROP).
------------------------------------
1.2 PRODUCTION CYCLE: GENERAL DATA
Picture 4a: General data (product-WHEAT, unit-T, status-In Progress, expert model-if applied) from Production cycle (above, old CROP) are displayed in work orders header (below, new CROP)
----------------------------------------------
1.2 PRODUCTION CYCLE: PLANNED DATA
Converting process rules:
a) Total plan QTY recorded within Production cycle is calculated according to assigned Crop area size. Additional data regarding planned yield/ha are calculated automatically.
Example: 105 tonnes recorded as planned for Crop area 1706802_5: 23,75 ha and Crop area 541779_5: 1 ha with SUM: 24,75 ha results in 100,75 tonnes for 1706802_5:23,75 ha and 4,24 tonnes for 541779_5: 1 ha.
b) Planned start&end date from Production cycles are not converted in any data in new crop. Each Work order`s Planned start date reflects first recorded realization task from Production cycle and meanwhile each Work order Planned end date reflects last recorded realization task.
Picture 4b: Planned yield data from production cycle (above, old CROP) are displayed and calculated in work orders` header as plan total (below, new CROP)
--------------------------------
1.3 PRODUCTION CYCLE: REALIZATION DATA
Converting process rules:
a) As Realization part within Production cycles was not developed to the end, no data from realization part are converted to Work orders header.
Picture 4c: Realized yield data from Production cycle (above, old CROP) are not displayed in Work orders within new CROP as Work orders posses only data about individual crop area.
----------------------------------------
1.4 PRODUCTION CYCLE: OTHERS
Picture 4d: Work order created for Production cycle type 600 (above, old CROP) is converted and changed into a new Work order ID as a doc. type 60C (below, new CROP)
--------------------------------------------
1.5 PRODUCTION CYCLE: SEED
Picture 4e: For Seed calculations tab (above, old CROP) no converted data within Work orders needed.
In further development seed QTY will be a part of Expert model.
----------------------------------
1.6 PRODUCTION CYCLE: HISTORY
Picture 4f: History data within Production cycles (above, old CROP) are displayed within individual Work order as task positions (below, new CROP)
----------------------------------------
2. Comparison between Farming tasks and Work order tasks
Farming tasks are replaced by three main WO task entry possibilities:
1. Right-click and entry on individual Work order´s position within Work order (Example:right-click on WO)
2. Task input and Planned task input within CROPS&VEGS menu (Task input)
3. Input Daily work within Tools/Daily plan
a) Data recorded within Farming tasks are displayed within individual Work orders: all data recorded for individual crop area within any tab (Sowing, Fertilization, Protection, Care and Cultivation, PRM Care and Cultivation, PRM Mechanical tasks, Other tasks, Moving, Grazing, Product) are displayed within individual Work order as a positions of Work order.
2.1 TASK
Picture 5: Record for realized work: SOWING at 20.3.2013 for within Production cycle WHEAT 2013 for two Crop areas 1706802_5 and 541779_5 (above, old CROP) is converted into position SOWING with Start date 20.3.2013 on two Work orders, one for each Crop area, related to Product Wheat (below, new CROP).
----------------------------
2.2 WORKER
Converting process rules:
a) Hours total reported for Production cycle are calculated and distributed to newly created Work Orders, according to Crop area size.
Example: 10 hours reported for John Sample for Crop areas 1706802_5 (23,75 ha) and 541779_5 (1 ha), with total area of 24,75 ha, results in 9,6 hours spended for CA 1706802_5 and 0,40 hours for 541779_5.
Picture 6: Record for Workers, recorded from task within Production cycle WHEAT 2013 (above, old CROP) converted within two Work orders at Resource hierarchy at tab WORKERS, with calculation of Task duration regarding Crop area sizes (below, new CROP).
--------------------------------------
2.3 USED CROP AREA
Picture 7: Data for used Crop area, recorded as % of whole CA area, within Farming task (above, old CROP) converted into data Plan Area (ha) and Done Area (ha) within Resource hierarchy for individual positions within work orders (below, new CROP).
---------------------------------------
2.4 MATERIAL WITH WAREHOUSES
Converting process rules:
a) Material Quantities recorded within Farming tasks are calculated regarding Crop area size:
Example: recorded material seed LENNOX at range of 4500 kg for two crop areas: 1706802_5 (23,75 ha) and 541779_5 (1 ha) with total area of 24,75 ha, results in 181,82 kg for WO on CA 541779_5 and 4.318,18 kg for WO on CA 1706802_5.
b) for each material data Plan/ha is calculated according to Crop area size.
Example: recorded total material of 4.500 kg for 24,75 ha results in 181,82 kg of LENNOX seed per ha.
Picture 8: Data for type & quantities of material recorded within Farming tasks (above, old CROP) converted into data Plan QTY and Done QTY within Resource hierarchy, tab Material for individual positions within work orders (below, new CROP).
-------------------------------------
Picture 9: Data about material´s issuing warehouse recorded within Farming tasks by Used material (above, old CROP) converted into data within Work order/tab Documents/Issue/Materials (below, new CROP).
---------------------------------------------
2.5 MACHINERY (SELF-PROPELLED&IMPLEMENTS)
Converting process rules:
a) within Farming tasks > Tools, Self-propelled and Implements were assigned to individual task. In case more Self-propelled & Implements were assigned within old crop, no links between Self-propelled & Implements & Worker were available. Therefore, Self-propelled & Implements are displayed in Resource hierarchy, tabs Self-propelled and Implements.
b) where Self-propelled &Implements were recorded for more crop areas, data about Done Time Qty for individual Self-propelled is calculated regards crop area size.
Example: assigned Tractor old and Seed drill Kverneland Accord DG recorded for range of 20 hours for two crop areas: 1706802_5 (23,75 ha) and 541779_5 (1 ha) with total area of 24,75 ha, results in 0,81 hours for 541779_5and 19,19 hours for 1706802_5 for each machine.
Picture 10: Data about assigned Self-propelled & Implements by individual task (above, old CROP) converted into data within Resource hierarchy as tab Self-propelled & Implements (below, new CROP).
--------------------------------
2.6 WORK ORDERS DOCUMENTS
Converting process rules:
a) All documents type 640 WO-Relieve for material and 660 WO-Relieve for service created within work order 600 in old crop are displayed within individual Work order as doc. type 60C through tab Documents. Data are calculated according to Crop area size.
Example: QTY of Wheat Lennox seed recorded at range 4.500 kg within 13-600-00001 through linked document is display within individual Work orders 13-60C-000001 and 13-60C-000002, through tab Documents > Issue.
Picture 11: Documents, created and linked through Work order as a doc. type 600 (above, old CROP) are displayed within individual Work order through tab Documents > Issue (below, new CROP).
------------------------------
2.7 HARVESTED YIELD
Converting process rules:
a) Harvested yield data within Farming tasks are displayed within individual Work order and calculated according to assigned crop area size.
Example: QTY of Yield Wheat at range 90 tonnes recorded for two crop areas 1706802_5 (23,75 ha) and 541779_5 (1 ha) with total area of 24,75 ha, results in 3,64 tonnes hours for 541779_5 and 86,36 tonnes for 1706802_5.
Picture 12: Harvested yield QTY & warehouse reported within farming tasks (above, old CROP) are displayed within individual Work order through tab Documents > Receiving Documents (below, new CROP).